Fluke 772 Milliamp Process Clamp Meter

Need more hours in your day? Save time by NOT breaking the loop on 4-20 mA signal measurements.

Are you spending time:

Taking mA measurements by removing a wire and breaking the loop
Calling the control room to isolate a loop
Testing analog input/ output on a console
Troubleshooting devices with mA inputs and outputs
Repairing intermittent or erratic 4-20 mA loops
Going back to the shop to get extra tools

The 772 mA Clamp Meter features:

Best in class 0.2 % accuracy
0.01 mA resolution and sensitivity
Measure 4 to 20 mA signals without ” breaking the loop”
Measure mA signals for PLC and control system analog I/ O
Dual backlit display with both mA measurement and percent of 4 to 20 mA span
Measurement Spotlight illuminates hard to see wires in dark enclosures
Detachable clamp with extension cable for measurements in tight locations
Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
Automatically change the 4 to 20 mA output for remote testing
Power saving features, auto-off, backlight timeout extend battery life
Hold function captures and displays changing measurements
Measure 4 to 20 mA signals with in-circuit measurement
Simultaneous mA in-circuit measurement with 24V loop power for powering and testing transmitters
Source 4 to 20 mA signals for testing control system I/ O or I/ Ps
mA output linear ramp or 25% step output
Automatically change the 4 to 20 mA output for remote testing