jual alat kelistrikan Fluke 805 Vibration Meter

Make go or no-go maintenance decisions with confidence. The Fluke 805 Vibration Meter is the most reliable vibration screening device available for frontline mechanical troubleshooting teams that need repeatable, severity-scaled readings of overall vibration and bearing condition.

What makes the 805 the best choice?

A meter – not a pen – that measures overall vibration as well as specific variables like bearing condition and temperature, to provide a more complete picture.
A combination vibration and force sensor tip that compensates for user variance ( force or angle) yielding accurate, repeatable readings.
A four-level severity scale and onboard processor calculate bearing condition and overall vibration using easy-to-understand textual alerts ( Good, Satisfactory, Unsatisfactory, Unacceptable) .
Sensor sensitivity can read a wide range of frequencies ( 10 to 1, 000 Hz and 4, 000 to 20, 000 Hz) covering most machine and component types.
Straight-forward user interface that minimizes the user inputs to RPM range and equipment type.

Features and Benefits

Innovative sensor design helps minimize measurement variations caused by device angle or contact pressure
Consistent data quality at both low and high frequency ranges
Four-level scale indicates severity of problems for overall vibration and bearing condition
Exportable data via USB
Trending in Microsoft® Excel using built-in templates
Overall vibration measurement ( 10 Hz to 1, 000 Hz) for acceleration, velocity and displacement units of measurement for a wide variety of machines
Crest Factor+ provides reliable bearing assessment using direct sensor tip measurements between 4, 000 Hz and 20, 000 Hz
Colored lighting system ( green, red) and on-screen comments indicate how much pressure needs to be applied to take measurements
Temperature measurement with Infrared Temperature Sensor increases diagnostic capabilities
On-board memory holds up to 3, 500 measurements
Audio output for listening to bearing tones directly
External accelerometer support for hard to reach locations
Flashlight for viewing measurement locations in dark areas
Large screen with high resolution for easy navigation and viewing

Use the 805 to check the following machine categories:

Chillers ( refrigeration)
Fans
Cooling tower drives
Centrifugal pumps
Positive displacement pumps

Air compressors
Blowers
Generic gearboxes ( rolling element bearings)
Machine tools ( motor, gearboxes, spindles, etc.)